小型除雪機設計,小型,設計
┊
┊
┊
┊
┊
┊
┊
┊
┊
┊
┊
┊
┊
裝
┊
┊
┊
┊
┊
訂
┊
┊
┊
┊
┊
線
┊
┊
┊
┊
┊
┊
┊
┊
┊
┊
┊
┊
┊
小型除雪機設計
[摘要] 我國北方地區冬季降雪時間長,雪量大,氣溫低,積雪數日經車輛、行人碾壓而被壓實。路面上壓實冰雪的清除問題關系到社會生產、人民生活、交通安全、環境保護等多個方面。目前國內外對壓實冰雪的清除還缺少行之有效的辦法。本文結合我國北方地區降雪后的特點及我國國情,主要針對路面上被壓實的冰雪研究了路面冰雪清除機械。
本文提出了對路面壓實冰雪進行擠壓、切削、破碎的技術原理。根據這一原理確定了路面冰雪清除機械基本方案并分析了其工作機理。提出利用裝載機為動力機,只需更換上清除冰雪裝置,實現了一機多用。研究了傳動系統各部件的匹配以及冰雪清除裝置與整機的匹配,進行了匹配計算和整機牽引性能分析。根據整機方案及相關條件確定了清除冰雪裝置中關鍵部件碾壓滾的構造、重量和有關技術參數;分析研究了碾壓滾上刀齒的結構和關鍵幾何參數,確定了刀齒在碾壓滾上的排列方式、數量和間距,并根據冰雪的物理機械性質計算了刀齒切削力。
[關鍵詞] 冰雪清除 切削 破碎 路面
Abstract
In the north of China, when the winter comes, the time for snowing is very long and the air temperature is low. The snow will become very hard after pressed by vehicles and foot passengers. So at this time snow cleaning became very important to people’s living, traffic safety and so on. At present, there is still no effective method for cleaning the pressed snow in the world. In this paper, according to the situation of our country, the author did some researches on the snow-cleaning machine which used to clean the pressed snow on the road surface.
In this paper, the author put forward a technical theory about use the method of pressing, cutting and cracking to clean the pressed snow. According to this theory, the author brought forward a project for snow-cleaning machine and analyzed its working principle. Here used the loader as the mover, when it was time to clean snow we just needed to replace the bucket with the snow-cleaning equipments. The matching calculation of components’ of transmission system and the whole machine were studied and analyzed. According to the project, we could decide the structure, weight and related technical parameters of the idler wheel. At the same time, the paper also analyzed the structure and geometry parameters of the idler wheel, gave a method about how to arrange the cutters and how to decide the reasonable amount of the cutters, how to calculate the cutter’s cutting force base on the snow’s physical and mechanical characters.
【Key words】 Snow—Cleaning Cutting Cracking Road surface
共 2 頁 第 2 頁
鏈接地址:http://m.szxfmmzy.com/article/43150040.html