3K（Ⅱ）型行星齒輪傳動設計,3K（Ⅱ）型行星齒輪傳動設計,行星,齒輪,傳動,設計 南京理工大學紫金學院 畢業設計說明書(論文) 作 者: 學 號： 系： 機械工程系 專 業: 機械工程及自動化 題 目: 3K行星齒輪傳動設計 講師 劉艷艷 指導者： (姓 名) (專業技術職務) 評閱者： (姓 名) (專業技術職務) 年 月 畢業設計說明書（論文）中文摘要 本課題主要是為了加強自身了解國內外傳動機構的發展現狀，根據自己所學的知識，按照要求設計一個行星齒輪傳動機構。本文較詳細地討論了行星齒輪傳動的發展概況，其結構組成和設計計算，強度的校核，結構設計等，分析了傳動條件，導出了傳動比、鄰接條件、同心條件、安裝條件的計算公式，探討了變位法改善嚙合性能和修復嚙合齒輪副。本文采用了3K(Ⅱ)型行星齒輪進行設計。它是一項較新型行星齒輪傳動，目前該項傳動新技術我國齒輪傳動中已獲了日益廣泛應用。 關鍵詞 行星齒輪 變位 傳動機構 畢業設計說明書（論文）外文摘要 Title The design of the planetary gear transmission Abstract This issue is mainly to strengthen our understanding of the development of domestic and international architacture and to design a planetary gear according to our learned knowledge. This article discusses the development of planetary gear in detail,and its structure composition and design calculations,strength checking,architectural design,analyses the driving conditions,deduces the formula of the gear ratio,adjacency condition, concentric conditions and installation conditions ,and explores the deflection method to improve performance and fix meshing gears. In this paper, I select the 3K (Ⅱ)-type planetary gear to design. It is a relatively new type of planetary gear transmission, the current of the drive gear in our new technology has been increasingly widely used. Keywords planetary gear deflection architacture